Preparation before configuration:
1) Power on the camera, press and hold the reset button for a few seconds, and then hear the camera prompt "Reset completed". When the camera prompts "Please scan the QR code on the camera and wait for connection" and the prompt tone "Didi..." is issued, it means that the device is waiting for configuration
2) The mobile phone opens WLAN and connects the WiFi used to configure the camera network
Configuration steps:
1) Open the APP, click the "+" button in the upper right corner of the device list. Scan the QR code on the device with your mobile phone, and continue to operate according to the system prompts. If the QR code is damaged, click [Can't find the QR code on the device], and select [AP hotspot connection]
2) Select the WiFi to be configured for the device, enter the WiFi password, and click [Confirm]
3) Click [Connect AP spot]
4) Connect to the device hotspot (starting with XVV) in [WLAN] or the WiFi selection interface, and the device will automatically connect to WiFi after returning to the app
5) Camera prompts "Received configuration information - Connecting - Network connected" indicates successful configuration, and APP prompts "Added successfully"
