1. The solar-powered camera in low power station has two modes: wake-up mode and standby mode

  2. Standby mode: Camera's main module will power off, only the communication module with low power still power on. When detects the outside signal( remote wake by user or PIR ), the camera wakes up quickly to record the event

  3. Wake-up mode:  If the device is woken up by user, the recording video is called normal recording; If it is woken up by PIR, the recording video is called alarm recording. After quitting real-time preview or the event ends, camera will get in standby mode again

  4. Support Adaptive power mode: In Adaptive power mode, when the power of the device is between 3 and 5 bars, the device never sleeps, just like normal 5V DC power supply mode. When the power of the device is below 3 bars, the device will enter standby mode and can be only woken up by PIR or user, the default mode is Low-power mode

  5. In Battery saving mode, the device is in standby mode and can only be woken up by the user, not by the PIR

  Note: When the device has only 1 bar of power left, low power status, can't be woken up by PIR in standby mode, and some high power consumption features are unavailable, such as PTZ and light control, etc.