Preparations before configuration

Power on the camera, hold down the reset button for a few seconds, and then you will hear the voice prompt "Reset successful". When the voice prompt "Please scan the QR code on the body label with your mobile phone and wait for the connection" is heard and "Beep..." is emitted, The prompt sound indicates that the device is in a state of waiting for configuration. 2) Turn on the WLAN on your mobile phone and connect to the WiFi used to configure the camera network.

Configuration steps

1) Open the APP and click the "+" button in the upper right corner of the device list -> Scan the QR code on the body label with your mobile phone and continue the operation as prompted by the system. If the QR code is damaged, click [If you can't find the QR code on the body, please click here], click [AP hotspot connection], and follow the system prompts to continue the operation. 2) Select the WiFi that needs to be configured for the device, enter the WiFi password, and click [OK] 3) Select [Connect to Hotspot] 4) On the [WLAN] or [Wi-Fi] interface of the mobile phone, select the connection device hotspot (starting with XVV). After confirming the connection hotspot, return to the APP and the device will automatically connect to Wi-Fi. 5) The camera's voice prompt "Received configuration information - Network connection in progress - network connection completed" indicates a successful configuration, while the APP prompts "Add completed"