· Click [Events] under the device window of the device list to enter the alarm message interface, click [All types] to filter the alarm types

    1) Motion detection alarm: all devices support, an alarm is triggered when an object moves in the monitoring screen

    2) Humanoid detection alarm: all devices support, AI service needs to be turned on, and the alarm will be triggered when human passes by on the screen

    3) PIR motion detection: only supported by devices with PIR function, when the device detects human infrared radiation, the alarm will be triggered

    4) Abnormal high temp alarm: only supported by temperature measurement equipment, the alarm will be triggered when the temperature measurement result is higher than the preset value

    5) Abnormal low temp alarm: only supported by temperature measurement equipment, the alarm will be triggered when the temperature measurement result is lower than the preset value

    6) Crying detection alarm: only supported by baby monitors, it triggers an alarm when it detects a baby crying

    7) Smoke detection alarm: only supported by devices with smoke detection module, the alarm will be triggered when the ambient smoke concentration is too high

    8) Power status: only supported by battery powered devices. The low battery alarm will be triggered when the battery is low. The shutdown alarm will be triggered when the battery is critically low and is about to power off. The power-on prompt alarm will be triggered when the battery is sufficiently charged for the device to power on